MyGrid 10K Gen 2 Electricity Saver
MyGrid 10K Gen 2 Electricity Saver
SKU:NGMGTNESB
You Save Extra $100 when you apply the coupon code.
• Get Saving Started in Minutes with Simple Setup: Install the manual transfer switch and choose which circuits run on MyGrid vs. utility power, connect your solar panels, and start enjoying energy savings, lower bills, and reliable backup power from day one.
• 10kW Whole-Home Power with High-Capacity Storage: Deliver up to 10,000W continuous (20,000W surge) with a 10,496Wh LiFePO₄ battery, enabling full-home energy usage—not just backup—so you can offset grid consumption every day.
• High-Efficiency Solar + Multi-Source Charging: Support up to 12,000W solar input with MPPT optimization, along with wind and AC charging, allowing you to continuously capture, store, and utilize the lowest-cost energy available.
• Peak Demand Reduction & Rate Optimization: Reduce demand charges and avoid tiered utility pricing by intelligently discharging stored energy during high-load, high-cost periods—ideal for time-of-use and demand-based rate plans.
• Long-Life LiFePO₄ Battery for Lower Cost per kWh: With 6,000+ cycles, the system delivers superior longevity and efficiency, significantly lowering your lifetime cost per stored kWh compared to traditional energy solutions.
• Expandable Storage for Increasing Savings Over Time: Scale from 10.5kWh to 73kWh+ and up to 20kW output by adding batteries or parallel systems—allowing deeper grid offset and greater long-term energy cost reduction.
• Fast Recharge + Seamless Backup Protection: Recharge to 80% in ~2 hours and benefit from <20ms automatic transfer, combining daily energy savings with uninterrupted backup power for outages and emergencies.
🚚Freight Delivery Notice: Curbside delivery only, subject to safe truck access. Buyer is responsible for moving the product from the carrier’s delivery point to its final location. Inside, garage, or driveway delivery is not included.
Save up to 70% on your electricity bill.
Store solar energy and use it when electricity costs more — reducing your reliance on expensive grid power.
Couldn't load pickup availability
You may also like
Innovative renewable solutions for a sustainable tomorrow.
Join us in building a greener world.
Features
Engineered for whole-home capability, the MyGrid 10K delivers high-capacity power, flexible charging, and reliable performance for any energy demand.
Setup in minutes
Get instant home backup power with a fast, hassle-free installation.
Renter Friendly
Enjoy whole-home power without permanent wiring or modifications.
EV to Home Compatible
Easily transfer energy between your EV and home for ultimate flexibility
Powerful 10KW 10,496Wh
Delivers robust, long-lasting energy to support essential circuits and heavy loads.
How MyGrid Delivers Real Savings
Use Solar First
Harvest free energy during the day and store it for later use.
Avoid Peak Rates
Power your home during high-rate hours using stored energy instead of the grid.
Off-Peak Smart Charging
Automatically recharge MyGrid when electricity is cheapest.
Reduce Grid Dependence
Less reliance on utility power = lower monthly bills.
Many homeowners can reduce electricity costs by up to 70%, depending on usage, rates, and system size, and how efficiently solar energy is utilized throughout the day.
What Makes MyGrid10K Stand Out?
True innovation belongs to everyone.
Unlike others who build for the niche few, MyGrid 10K is designed for the everyday homeowner. We’ve cut the complexity and the high costs, proving that you don’t need a hefty price tag to power your own life. The MyGrid 10K captures the best of home energy storage and makes it accessible, affordable, and easy to use.
Videos
Watch product tutorials and guides.
Unboxing the Nature’s Generator MyGrid 10k – Home Power Gamechanger!
Complete MyGrid 10K Review | Off-Grid Power for Your Home
Nature’s Generator MyGrid 10K | What You Should Know Before Buying
See how the MyGrid 10K handles real household power needs!
MyGrid 10K Full Installation Tutorial & 8x Solar Panels Setup!
How to Install a Nature’s Generator 240V Manual Transfer Switch (Step-by-Step Guide)
How to Expand Battery Power on the Nature’s Generator MyGrid 10K
How to Combine Two Nature’s Generator MyGrid 10K Systems | Step-by-Step Tutorial
Nature’s Generator MyGrid 10K | Adjustable 240V Charging + UPS Power Backup Demo
Tech Specs
Find all the essential technical details of the MyGrid 10K, including power output, capacity, and system specifications.
Inverter
Output Continuous Power
10,000W
Output Peak Power
20,000W
Output Voltage
120V/240V Split Phase or 120V/208V 2 of 3 Phases
Output Frequency
60Hz
Output Power Form
Pure Sine Wave
Auto Switching
<20ms
Battery
Capacity
51.2V 205Ah (10496Wh)
Cell Chemistry
Lithium Iron Phosphate (LiFePO4)
Cycle life
>6000 Cycles
Self Discharge
Recommended recharging every 6 months
Charges
120Vac Charger
1000W
208Vac or 240Vac Charger
4500W
Wind Charger
350W
Solar Charger
12,000W 120Vdc-550DVdc
Solar Charge Mode
2x MPPT
Ports
Output Ports:
4x NEMA 5-20R Outlet
1x NEMA TT-30R Outlet
1x NEMA L14-30R Outlet
1x NEMA 14-50R Outlet
1x Expansion Port
Input Ports:
2x Solar Input Ports
1x Wind Input Port
1x 120Vac Input Port
1x 208Vac or 240Vac Input Port
1 x Alt. 208Vac or 240Vac Input Port
General
Optimal Operating Temperature
68 – 86°F (20 – 30°C)
Storage Temperature
14 – 113°F (-10 – 45°C)
Battery Charging Temperature
32 – 113°F (0 – 45°C)
Battery Discharging Temperature
14 – 113°F (-10 – 45°C)
Warranty
5 Years Limited Warranty
Dimension and Weight
Generator Dimensions:
21.8 x 8.5 x 38.5 inches (555.4 x 216 x 980 mm) not counting mounting bar
Generator Weight: 152 lbs (69 kg)
Battery
Capacity
51.2V 205Ah (10496Wh)
Cell Chemistry
Lithium Iron Phosphate (LiFePO4)
Cycle life
>6000 Cycles
Self Discharge
Recommended recharging every 6 months
General
Optimal Operating Temperature
68 – 86°F (20 – 30°C)
Storage Temperature
14 – 113°F (-10 – 45°C)
Battery Charging Temperature
32 – 113°F (0 – 45°C)
Battery Discharging Temperature
14 – 113°F (-10 – 45°C)
Warranty
5-Year Limited Warranty
Certification:
Dimension and Weight
Battery Dimensions:
21.8 x 8.5 x 23.4 inches (555.4 x 216 x 596 mm) not counting mounting bar
Battery Weight: 213 lbs (96.6 kg)
Specification
Voltage:
120V/240V
Inlet:
CS6375
Number of Circuits:
12 circuits
Dimension and Weight
Dimensions:
14.1 inch x 15.3 inch x 5 inch (35.8 cm x 39 cm x 12.7 cm)
Weight out of box:
31.9 lbs. (14.5 Kg)
Certification*
Power Rating
Maximum Power (Pmax)
440W
Maximum Power Voltage (Vmp)
32.30
Maximum Power Current (Imp)
13.63
Open-circuit Voltage (Voc)
38.80
Short-circuit Current (Isc)
14.39
Module Efficiency STC (%)
22.53%
Dimensions & Characteristics
1722*1134*30mm(67.8*44.6*1.2 inch)
Cell Type
N-Type TOPCon 182×91mm
No.of Half-cells
108 (6×18)
Frame
Anodized Aluminum Alloy - All Black
Weight
24.5 kg (54 lbs)
Glass
2.0 mm+2.0mm, High Transmission, AR Coated Heat Strengthened Glass
Operation Temperature
-40℃~+85℃ (-40°F ~+185°F )
Junction Box
IP68 Rated, connector compatible with MC4
Output Cables
4 mm² ,350mm (With Connectors)
What's In The Box?
MyGrid 10K Energy Savings Bundle
MyGrid 10K Gen 2 Electricity Saver
1× MyGrid 10K Gen 2 Generator
1× MyGrid 10K Battery
1× AC Power Cord
1× Battery Cable Set
1× Communication Cable
2× MyGrid 10K Mounting & Security Hardware
8x 440W Rigid Bifacial Panel
2x 50ft Quick Release Solar Cable
1x 50A Manual Transfer Switch
1x 15A Smart Plug
1x 15A GFCI Power Outlet Box
MyGrid 10K Gen 2 Electricity Saver Plus
1× MyGrid 10K Gen 2 Generator
2× MyGrid 10K Battery
1× AC Power Cord
2× Battery Cable Set
2× Communication Cable
3× MyGrid 10K Mounting & Security Hardware
12x 440W Rigid Bifacial Panel
3x 50ft Quick Release Solar Cable
1x 50A Manual Transfer Switch
1x 15A Smart Plug
1x 15A GFCI Power Outlet Box
MyGrid 10k Specification Sheet
MyGrid 10K Generator and Battery User Manual
MyGrid 10K Inverter Certificate of Compliance - ANSI/CAN/UL 1741
MyGrid 10K Battery cETLus Certificate -ANSI/CAN/UL 1973
MyGrid 10K Solar Panel Connection Guide
50A Manual Transfer Switch Specification Sheet
50A Manual Transfer Switch User Manual
Manual Transfer Switch Certificate - UL1008, CAN/CSA C22.2 No. 178.1
Bundle Comparison
Purpose-built systems for cost savings and reliable power
| Feature | Bundle A | Bundle B |
|---|---|---|
| Solar Panels | 8 x 410W | 12 x 410W |
| Battery Units | 1 | 2 |
| Quick-Release Cables | 2 x 50 ft | 3 x 50 ft |
| Average Savings | Up to 40% | Up to 70% |
| Best For | Moderate usage | High usage, full home backup |
| Warranty | 60 months | 60 months |
Questions & Answers
Have a Question?
-
Can you recharge using solar and wind at the same time?
Hi Ryan,
Thank you for reaching out. Yes, you can charge the MyGrid 10K using solar and wind simultaneously. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!
Reviews